Sign In | Join Free | My bushorchimp.com |
|
Brand Name : avic
Model Number : IMU6
Certification : CE ROHS
Place of Origin : CHINA
MOQ : 1
Price : 3000~6000 USD
Payment Terms : T/T
Delivery Time : 10 days
Product name : 9 axis MEMS IMU
gyro measuring range : ±400°/s
Zero-bias stability : ≤ 1 °/H
Random walk : ≤ 0.2 °/√ H
Resolution : 1 °/H
Scale factor nonlinearity : 500 ppm
Bandwidth : 125Hz
STIM300 Analog MEMS IMU Sensor Low Price Inertial Measurement Sensor 3 Accelerometer, 3 Gyro, Pitch Rolll Heading Temp
Gyroscope specifications
Parameter | Unit | IMU6-1 | IMU6-1A |
Measuring range (customizable) | °/s | ±400 | ±400 |
Zero bias stability (@ Allan Variance) | °/h | 1 | 0.5 |
Zero bias stability (1s smooth, 1σ, room temperature) | °/h | 10 | 5 |
Zero bias stability (10s smooth, 1σ, room temperature) | °/h | 5 | 1 |
Zero-bias error over full temperature range | °/h | 20 | 10 |
Random walk | °/√h | 0.2 | 0.1 |
Zero-bias repeatability | °/h | 10 | 5 |
Zero bias acceleration sensitivity | °/h/g | 1 | 1 |
Resolution | °/h | 2 | 1 |
Scale factor nonlinearity | ppm | 500 | |
Scale factor repeatability | ppm | 500 | |
Cross coupling | % | 0.1 | |
Bandwidth | Hz | 125 |
Add table technical indicators
Parameter | Unit | IMU6-1y-1 | IMU6-1y-2 |
Measuring range (customizable) | g | ±10 | ±30 |
Zero-bias stability (Allan Variance @ 25 ℃) | mg | 0.02 | 0.05 |
Zero-bias stability (1s smoothing) | mg | 0.1 | 0.5 |
Zero-bias stability (10 s smoothing) | mg | 0.05 | 0.2 |
Zero-bias error over full temperature range | mg | 1 | 3 |
Random walk | m/s/√h | 0.001 | 0.002 |
Zero-bias repeatability | mg | 0.1 | 0.5 |
Scale factor repeatability | ppm | 500 | |
Scale factor nonlinearity | ppm | 500 | |
Bandwidth | Hz | 125 |
"IMU6-1y-x" in the drawing is the product code ". According to the product naming rules of the company," y "in IMU6-1y-x can be" A "," B "," C "or no letter to distinguish different performance index requirements, and" X "can be" 1 "," 2 "." 3 "and" 4 "to distinguish different product plus meter ranges. "XX-XXX" is the product number.
IMU6-1y-x IMU is installed through 3 Φ4.4 through holes, and installed with 3 M4 screws (with spring washer and flat washer). When installing the connector, the plug shall be locked with the socket and the cable shall be fixed. In the figureA,BIs the installation datum plane of the inertia group.
It is recommended that the flatness of the mounting surface opposite to the reference surface shall not be greater than 0.01 mm, the verticality shall not be greater than 0.02 mm, and the surface roughness shall not exceed 0.8 μm.
Dimension
STIM300 Analog MEMS IMU Sensor , 3 Gyro Inertial Measurement Sensor Images |